Diseases & Conditions A - Z
powered by Talix

How to Make a Splint

What Is a Splint?

A splint is a piece of medical equipment used to keep an injured body part from moving and to protect it from any further damage.

A splint is often used to stabilize a broken bone while the injured person is taken to the hospital for more advanced treatment. It can also be used if you have a severe strain or sprain in one of your limbs. Placed properly, a splint will help ease the pain of an injury by making sure that the wounded area does not move.

If you or a loved one is injured at home or during an activity, such as hiking, you can create a temporary splint from materials around you.

What You Will Need to Make a Splint

The first thing you will need to make a splint is something rigid (hard to bend) in order to stabilize the fracture. This could be a rolled-up newspaper, a heavy stick, a board or plank, or a rolled-up towel. If you are using something with sharp edges or something that might cause splinters, such as a stick or board, be sure to pad it by wrapping it in cloth.

You will also need something to fasten the splint in place. Shoelaces, belts, ropes, and strips of cloth will work. Medical tape can also be used if you have it. Try not to place commercial tape, such as duct tape, directly against a person’s skin.

How to Apply a Splint

Attend to any bleeding before you attempt to place the splint. You can stop the bleeding by putting pressure directly on the wound. Then, apply a bandage, a square of gauze, or a piece of cloth. Do not try to move the body part that needs to be splinted — you may accidentally cause more damage.

Place the splint so that it rests on the joint above the injury and the joint below it. For example, if you are splinting a forearm, place the rigid support item under the forearm. Then, tie or tape it to the arm just below the wrist and above the elbow.

Avoid placing ties directly over the injured area. You should fasten the splint tightly enough to hold the body part still, but not so tightly that the ties will cut off the person’s circulation.

Once the splint is applied, you should check the areas around it every few minutes for signs of decreased blood circulation. If the extremities begin to appear pale, swollen, or tinged with blue, loosen the ties that are holding the splint.

If the injured person complains that the splint is causing pain, try loosening the ties a little. Then, check that no ties were placed directly over an injury. If these measures do not help and the person is still feeling pain from the splint, you should remove it.

The injured person may be suffering from shock if they are feeling faint or taking only short, rapid breaths. In this case, try to lay the person down without affecting the injured body part. If possible, you should elevate their legs and position their head slightly below heart level.

After you have applied the splint and the injured body part is no longer able to move, call 911 or take your loved one to the nearest urgent care clinic or emergency room for a checkup and further treatment.

Splinting the Hand

The hand is an especially difficult area to immobilize. Here are some tips for making your own hand splint.

First, treat any open wounds and control any bleeding. Then, place a wad of cloth in the palm of the injured person’s hand. A washcloth, a ball of socks, or a tennis ball can work well. Ask the person to close their fingers loosely around the object.

After the person’s fingers are closed around the object, loosely place padding between their fingers. Next, use a large piece of cloth or gauze to wrap the whole hand from the fingertips to the wrist. The cloth should go across the hand, from the thumb to the pinkie.

Finally, secure the cloth with tape or ties. Make sure to leave the fingertips uncovered. This will allow you to check for signs of poor circulation.

Once the hand splint is on, seek medical attention at an emergency room or urgent care center as soon as possible.

Content licensed from:

Written by: Debra Stang
Medically reviewed on: Dec 15, 2015: William A. Morrison, M.D.

This feature is for informational purposes only and should not be used to replace the care and information received from your health care provider. Please consult a health care professional with any health concerns you may have.
Symptom Search
Enter your symptoms in our Symptom Checker to find out possible causes of your symptoms. Go.
Drug Interaction Checker
Enter any list of prescription drugs and see how they interact with each other and with other substances. Go.
Pill Identifier
Enter its color and shape information, and this tool helps you identify it. Go.
Drugs A-Z
Find information on drug interactions, side effects, and more. Go.